LYNX micro IoT Module
This LYNX micro IoT module, namely the OriginIoT module is an integrated system for cellular IoT sensing and communcations. This OriginIoT has again broken barriers to merging customizable sensor capabilities with GPS tracking via cellular communications.
This module can accommodate a wide array of sensors via UART, SPI, I2C or GPIO and combines a penta-band 3G GSM module, with 2G fallback for global coverage, with superior positional accuracy of stand-alone GNSS.
Variants of this module include : 3GPP CAT-M1 and CAT-NB1 (also known as NB-IoT). These variants of the module will be slightly smaller than the current module.
Data is configured over a web interface, eliminating the need for additional embedded firmware coding. The ease and flexibility of adding the mini+mighty Micro IoT module to a vast array of applications quickens time to market while minimizing the size of your IoT sensor device.
This new module concept enables developing IoT devices and applications in just 6 weeks !!!
Features:
- Cellular Communiction (3G, CAT-M1, CAT-NB1).
- Embedbed CPU, RAM and Flash.
- Embedded mbed firmware - completely integrated.
- Cloud Connected.
- Connect to >100+ sensors.
- Smallest footprint in the market.
- Low power applications.
Specifications:
| Cellular Bands |
HSPA B1 (2100), B2 (1900), B5 (850), B6 (800 UMTS), B8 (900), B19 (800 LTE) 2G EDGE, GSM, GPRS 850, 900, 1800, 1900 |
|
*LPWAN Bands CAT-M1 & CAT-NB1 (NB-IoT) |
*B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B26, B28 Global coverage. |
| Audio‐certified codec | HR, FR, EFR, AMR, digital audio, DTMF, echo cancellation and noise reduction |
| Cloud services |
FOTA upgrades Options: Connectivity Management, Device Management, Application Enablement System Drivers Windows® 7, Windows® 8, Linux Driver: Standard ECM, Android RIL |
| GNSS |
Frequency Bands: GPS+GLO, BDS, GAL, QZSS Sensitivity: ‐165dBmAccuracy: < 1.5mTTFF: < 1secA‐GPS |
| Interfaces |
2wLPUART 2wUART I2C GPIO X 6 ADC / DAC USB 2.0 OTG SPI PWM |
| Hardware |
Dimensions: 23x25 mm Height: 4.7 mm Weight: 4.8 gr Connector types: Power ‐ Molex 5050040810, Signal ‐ Molex 5046185010 GSM antenna ‐ UFL, GNSS antenna ‐ WFL Power consumption: (TYP) 185mW @ 3.7V Supply voltage range: 3.3 ‐ 4.5 V |
| Operating temperature range | Industrial grade: ‐40°C to +85°C |
Note: * = Variants of this module will be available with a CAT-M1 and/or CAT-NB1 (NB-IoT) module to connect to global carriers.
Typical Applications:
- GPS tracking applications.
- Remote Sensing Applications.
- eHealth Applications.
- Sports Applications.
Datasheet - Download from Link:
Flyer (IoT Project in under 6 Weeks !!!) - Download from Link:
Note: EVK Developent Kits and Modules are available. Please refer to following link:
